The SMA to SMA series adapter is an adapter used to connect two SMA (SubMiniature version A) radio frequency (RF) connectors. The SMA connector is a miniaturized connector widely used in RF and microwave equipment, and is often used in applications with a frequency range up to 18 GHz. The SMA to SMA adapter allows reliable signal transmission between different devices, ensuring precise connection between SMA connectors, and is suitable for various occasions that require stable RF signal transmission.
Frequency: DC ~ 18GHz
VSWR: 1.15
Withstanding Voltage: 1000Vrms
Material: Outer Conductor - Stainless Steel
Inner Conductor - Brass
Insulator - PTFE

KEEP IN TOUCH
A technician bolts a BNC-fed antenna to a mast, runs a vibration sweep, and watches the received level flutter by a few tenths of a dB. Nothing has failed. The bayonet collar has ...
READ MOREIf you are building a 5G small cell, a bench-test rack, or a satellite ground terminal, the connector at the end of the coaxial cable is usually the last item specified and the fi...
READ MOREA jumper comes off the bench, is offered up to a spectrum analyser port, and will not seat. Nothing is broken. One end is an SMA, the other a 2.4 mm; both are 50 Ω, both look like...
READ MOREIf you work with RF systems, you already know that VSWR (Voltage Standing Wave Ratio) and return loss are two sides of the same coin. Both measure the same physical phenomenon — t...
READ MORERequest for a call today