RF coaxial connector welding method

The welding methods of RF coaxial connectors mainly include manual welding and machine automatic welding. ‌

Manual welding method ‌Preparation ‌: Remove the insulation layer of the connector and cable to expose the inner and outer conductors. ‌Cleaning ‌: Use alcohol or cotton yarn dipped in alcohol to clean the welding points of the connector and cable to remove oil and oxides. ‌Set temperature and time ‌: Preheat the soldering station to an appropriate temperature, and set the appropriate welding temperature and time according to the material and specifications of the connector and cable. ‌Welding operation ‌: Fix the soldering station hot head on the connector and cable welding point, and quickly remove the soldering station hot head after waiting for the hot head to reach the predetermined temperature. ‌Welding quality inspection ‌: Use tools such as a multimeter to check the welding quality to ensure that the inner and outer conductors are well connected. ‌

Automatic welding method ‌Automatic loading and unloading ‌: Provide the connector and cable to be welded to the automatic welding machine, and realize automatic loading and unloading through a conveyor belt or a robotic arm. ‌Cleaning ‌: Use alcohol to clean the welding points of the connector and cable. ‌Automatic welding‌: Set the parameters of the automatic welding machine, including temperature, time, etc., and start the automatic welding process.
‌Welding quality inspection‌: Use automatic detection equipment to check the quality of the welds and eliminate unqualified products.
Precautions
‌Safety measures‌: High temperature and sparks are generated during welding. Protective gloves, goggles, etc. must be worn, and the operating environment must be well ventilated.
‌Temperature control‌: The temperature and time must be accurately controlled during welding to avoid excessively high or low welding temperatures.